TURBINE.PARTS > Catalogs

Catalogs

Name Manufacturer Description
2 1317 0030 SV/16584  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1317 0030 SA w/Vacuum Pump 253.511 & fittings, Wt 55lbs, Group A
2 1320 0010 SV/16580  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1320 0010 SA w/Vacuum Pump 253.511 & fittings, Wt 57 lbs, Group B
2 1327 0010 SV/16585  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1327 0010 w/Anchor Stand BST 300V, Vacuum Pump 253.511 & fittings, Wt 82 lbs, Group A
2 1328 0050 SV/16583  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1328 0050 SA w/Anchor Stand BST 300V, Vacuum Pump 253.542 & fittings, Wt 79 lbs, Group A
2 1333 0010 SV/16581  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1333 0010 SA w/Vacuum Pump 253.511 & fittings, Wt 52 lbs, Group A
2 1335 0010 SV/16582  Unitec  Combination Drill Rings, Complete with Anchor Vacuum Stand and Vacuum Pump: 2 1335 0010 SA w/Vacuum Pump 253.511 & fittings, Wt 55 lbs, Group A
2 1602 0030/16744  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Corner Drill, #1 MT, 500 RPM, .7 HP, 5/8" capacity in steel, Group A
2 1701 0030/16745  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Corner Drill, #2 MT, 270 RPM, 1.8 HP, 7/8" capacity in steel, Group A
2 1801 0030/16746  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Corner Drill, #3 MT, 260 RPM, 2.6 HP, 1-1/4" capacity in steel, Group A
2 1806 0010/16748  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Hydraulic Corner Drill, #3 MT, 220 RPM, 3.8 HP, 1-1/4" capacity in steel, Group A
2 20870010/16750  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 7/8" ID square drive, 20 RPM, 1.35 HP, Wt 29 lbs, lever throttle, Group A
2 20870030/16751  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 7/8" ID square drive, 20 RPM, 1.35 HP, Wt 29 lbs, twist throttle, Group A
2 20870050/16749  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, 13/16" ID sq drive (short handle on exhaustive side, lever throttle), Group A
2 2088 0010/16752  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 7/8" ID square drive, 60 RPM, 1.35 HP, Wt 29 lbs, lever throttle, Group A
2 2088 0030/16753  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 7/8" ID square drive, 60 RPM, 1.35 HP, Wt 29 lbs, twist throttle, Group A
2 2089 0010/16756  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #3 Morse Taper Drill w/spindle feed, 1.7HP, 250 RPM, 1-1/4" drill cap in steel, Wt 28 lbs, lever throttle, Group A
2 2089 0030/16757  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #3 Morse Taper Drill w/spindle feed, 1.7HP, 250 RPM, 1-1/4" drill cap in steel, Wt 28 lbs, twist throttle, Group A
2 2090 0010/16765  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Hydraulic Drive Unit, 3/4" F sq dr, 565 stall torque, 20 RPM load speed, 1.5HP, Wt 28 lbs, Group A
2 20930010/16762  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 1-13/16" ID square drive, 20 RPM, 1.35 HP Wt 29 lbs, lever throttle, Group A
2 20930030/16763  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 1-13/16" ID square drive, 20 RPM, 1.35 HP Wt 29 lbs, twist throttle, Group A
2 2104 0030/16747  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Corner Drill, reversible, 4# Mt, 180 RPM, 3 HP, 2-1/8" capacity in steel, Group A
2 2502 0010/16760  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #4 Morse Taper Drill w/spindle feed, 2.5 HP, 80 RPM, 2" drill cap in steel, Wt 37 lbs, lever throttle, Group A
2 2502 0030/16761  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #4 Morse Taper Drill w/spindle feed, 2.5 HP, 80 RPM, 2" drill cap in steel, Wt 37 lbs, twist throttle, Group A
2 2506 0010/16758  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #3 Morse Taper Drill w/spindle feed, 2.5 HP, 220 RPM, 1-1/4" drill cap in steel, Wt 32 lbs, lever throttle, Group A
2 2506 0030/16759  Unitec  Air and Hydraulic Corner Drills and Slow Drives: #3 Morse Taper Drill w/spindle feed, 2.5 HP, 220 RPM, 1-1/4" drill cap in steel, Wt 32 lbs, twist throttle, Group A
2 2804 0010/16764  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Air Drive Unit, reversible, 1-1/8"F sq dr, 1970 stall torque, 20 RPM load speed, 5 HP, Wt 82 lbs, Group A
2 2810 0010/16766  Unitec  Air and Hydraulic Corner Drills and Slow Drives: Hydraulic Drive Unit, 1-1/8" F sq dr, 2320 stall torque, 12 RPM load speed, 3.5HP, Wt 77 lbs, Group A
25GP-WD/16635  Unitec  Hand-Held Mixers and Mixing Stations: Mixing Stand, Holds 5 gallon pails, ht 35", length 26" width 14", wt 64lbs, Group B
30300/17179  Unitec  ROLEI BE 5 Sheet Metal Deburring Machine: ROLEI BE D sheet metal deburring machine, Qty 1
30320/17183  Unitec  ROLEI BE 5 Sheet Metal Deburring Machine: Machine stand, Qty 1
4CB127UF/17856  Unitec  Wet Diamond Segmented Core Bit, 5" dia x 16" drilling depth, 18" overall length, 'Group C
4CB152UF/17857  Unitec  Wet Diamond Segmented Core Bit, 6" dia x 16" drilling, 18" overall length, Group C
4CB178UF/17858  Unitec  Wet Diamond Segmented Core Bit, 7" dia x 16" drilling depth, 18" overall length, Group C
4CB204UF/17859  Unitec  Wet Diamond Segmented Core Bit, 8" dia x 16" drilling depth, 18" overall length, Group C
4CB255UF/17860  Unitec  Wet Diamond Segmented Core Bit, 10" dia x 16" drilling depth, 18" overall length, Group C
4CB306UF/17861  Unitec  Wet Diamond Segmented Core Bit, 12" dia x 16" drilling depth, 18" overall length, Group C
5 1005 0010  Unitec  Air Chain Saw (for wood and plastic): Air Chain Saw, (ATTA.1110) 10" Utility, 1.2 HP, 90 psi/30cfm, Group A
5 1007 0003  Unitec  Air Chain Saw (for wood and plastic): Air Chain Saw, 15" 4HP, 90psi /92 cfm, Group A
5 1007 0010  Unitec  Air Chain Saw (for wood and plastic): Air Chain Saw, 17" 4HP, 90psi /92 cfm, Group A
5 1007 0020  Unitec  Air Chain Saw (for wood and plastic): Air Chain Saw, 21" 4HP, 90psi /92 cfm, Group A
5 1007 0040  Unitec  Air Chain Saw (for wood and plastic): Air Chain Saw, 25" 4HP, 90psi /92 cfm, Group A
5 1008 0030  Unitec  Air Chain Saw (for wood and plastic): Underwater Air Chain Saw, 21", 4 HP, 90 psi/92 cfm, Group A
5 1008 0040  Unitec  Air Chain Saw (for wood and plastic): Underwater Air Chain Saw, 25", 4 HP, 90 psi/92 cfm, Group A
5 1208 9940/16453  Unitec  Hacksaw Accessories: Auto Feed Pipe Clamp (for use with Air Hacksaw 5 1212 0010), Group A
512120010/16443  Unitec  Hacksaws (Air, Electric and Hydraulic): Air Hacksaw, W/roll throttle (only for use with auto feed pipe clamp 5 1208 9940)Group A
512120050  Unitec  Hacksaws (Air, Electric and Hydraulic): Air Hacksaw, w/lever throttle (MOT6-18-2), 1.5HP, 330 strokes per min., 51 cfm @ 90 psi, Group A
512150070/16444  Unitec  Hacksaws (Air, Electric and Hydraulic): Electric Hacksaw, variable speed, 1.5 HP, 100-400 strokes per minute, Group B
512200010/16445  Unitec  Hacksaws (Air, Electric and Hydraulic): Hydraulic Hacksaw, 3.8 HP, 100-300 strokes per minute, Group A
7 1111 0010/16631  Unitec  Hand-Held Mixers and Mixing Stations: Hand-Held Mixer, Pneumatic, 0-400 RPM, 1.5 HP, 49 cfm @ 90 psi (paddle not included), Group A
7 1112 0010/16632  Unitec  Hand-Held Mixers and Mixing Stations: Hand-Held Mixer, Pneumatic, 0-230 & 200-420 RPM, 1.5 HP, 49 cfm @ 90 psi (paddle not included), Group A
Page: 12345→

Термореле 26QL,QM 01-017021-300 (-73,3 до +148С)
Пневмоусилитель Midland Pneumatic 2325M21-EC2B 1/4” NPT 3/2 MAX WP-12BAR

Датчик температуры THERMO EST SI/14 type SI 14.1 EExd

Трансмитер AGM DIN4000-13F
Датчик вибрации Bently Nevada 30008-00-12-30-02
Кабель датчика Bently Nevada 2789-180